This page...
Having enough turning room in front of the garage had always been a problem at Noel's home. One solution was to excavate into an upper level of the property to create a turning space.
Noel engaged a landscape architect to draw up some sketches. As Noel has a background in engineering, he felt confident to play around with the sketches until he eventually got a solution to suit.
Once he was ready to go ahead, the first step was to employ a
![]() |
| The original driveway |
The second step was to install a retaining wall along the newly excavated upper level. Noel installed concrete blocks to about a metre high, to achieve stability to the earth works. The blocks have a bevelled, three-way face and are held together by an integral rear lip
![]() |
| Halfway through |
Building consent wasn't needed as the wall was under 1.5 metres high.
“The key to building a good wall is spending the time on the foundations,” said Noel. “I spent a lot of time, after digging a foundation ditch, filling it and compacting it with gravel to get a good even base. This took most of the time but made all the difference to a good straight finish to the wall.”
The third step was landscaping. The initial landscaping involved many hours backfilling the wall with the excavated topsoil. The second stage landscaping involved planting the dirt behind the wall to achieve a more aesthetic finish, rebuilding the concrete path to the door, and putting in new lawn.
![]() |
| The completed turnaround |
The landscaping is a work in progress. Noel commissioned a planting plan, which he intends working to in the winter months. He intends hiring a rotary hoe to get the earth ready.
Noel is happy with the results – he has turning space in front of his garage and a refreshed garden area. He hadn’t added up the total cost but estimates the excavation work cost around $2,000 and the blocks came to about $6,000. Doing most to the work himself was a major saving.





